Filter
Top Products
Cleaning the headphones
To clean the headphones, use a soft, damp cloth. If necessary, the headphones can be cleaned with
a cloth that has been dipped in soapy water (use a mild cleanser such as washing-up liquid).
Note!
Do not immerse the headphones in water or allow the capsules to become wet.
Never use solvent-containing cleansers.
Available accessories and spare parts
y Ear cushions
y Headband padding
y Connecting cable
Replacing the ear cushions
̈ Grasp behind the ear cushions and pull them up and away from the earcups.
̈ Slide the new ear cushions onto the earcups.
Replacing the headband padding
̈ Pull the Ziploc type fastening strips of the headband padding apart, as shown in the diagram
on the left, and remove the worn headband padding.
̈ Put the new headband padding around the headband.
̈ Pull the two edges of the headband padding together so that the fastening strips slightly
overlap.
̈ Join the fastening strips.
Replacing the connecting cable
̈ Remove the ear cushion. Grasp behind the ear cushion and pull it up and away from the earcup.
̈ Loosen the screw ᕡ and remove it.
̈ Remove the cover from the earcup ᕢ.
̈ Pull the connector ᕣ out of the socket.
̈ Remove the strain relief of the connecting cable from the holding device ᕤ.
̈ Insert the strain relief of the new connecting cable into the holding device.
̈ Plug the connector ᕣ of the new connecting cable into the socket as shown in the diagram on
the left.
̈ Put the cover back onto the earcup ᕢ.
̈ Replace the screw ᕡ and tighten it.
̈ Slide the ear cushion onto the earcup.
ᕡ
ᕢ
ᕤ
ᕣ
Sennheiser electronic GmbH & Co. KG
30900 Wedemark, Germany
www.sennheiser.com
Telefon +49 (5130) 600-0
Telefax +49 (5130) 600-300
Printed in Germany
92106 Publ. 06/03