Filter
Top Products
MANIPULATION
FUNCTION
DISPLAY
(RX)
28EM 203, Publ. 10/94 engl
Use
or
to select the parameters to be indicated.
Depress
and subsequently
to store the latest setting
or depress
to stop storage.
Y
N
Y = YES !
Y
SET
N = NO !
N
CONTINUED FROM PAGE 27, CH. 4.1.4
SET
ESC
MENU
AB
DIVERSITY
Y
N
µV
1000
100
RF
150
100
DEV
%
After having depressed
and
NOTA BENE
• The display is only operative if SK 50 TV
or SK 250 TV transmitters are used!
• After power-up of the transmitter, it will
take the display about 10 seconds to
indicate the battery condition.
TRANSMITTER BATTERY CONDITION/FIELD STRENGTH
to be indicated:
The left-hand bargraph display indicates the
battery condition (bat = batterie) in %
In contrast to DEV and RF, the battery
condition is indicated by one LED only.
If the transmitter battery does not transfer
any data, the LED does not light up.
The right-hand bargraph display shows the
field strength(RF= radio frequency) in µV
Y
ESC