Filter
Top Products
5
Models
Type: EKI 1029-7 03475 (7 channels, yellow volume control)
EKI 1029-12 03252 (12 channels,grey volume control)
EKI 1029 PLL-16 03627 (16 channels,blue volume control)
EKI 1029 PLL-32 04623 (32 channels,blue volume control)
Headphone socket
Socket ቦ serves to connect magnetic or dynamic mono headphones. For suitable headphones please see
"ACCESSORIES".
Connection
Socket: 3.5 mm for mono jack plug, max. output voltage: 0.9 Vrms / 200 Ω.
Attachment
Use the clip at the rear of the unit to attach the receiver to your clothing. Make sure that diode ቢ is not
covered. It is also possible to lay the receiver on a table (with the diode up).
Putting the EKI 1029 to work
The receiver is switched on automatically after the headphone has been plugged into socket ቦ. Select a
channel using switch ብ (EKI 1029 PLL-32: ብ + ቧ). Adjust the volume with volume control ባ.
Charging method
The portable charging unit L 1029-75 serves to recharge the batteries after the receiver has been used.
Accessories (to be ordered separately)
HD 410 D (Art. No. 02146) open-type headphone with silicone earpads
HD 1019 (Art. No. 03985) open-type headphone with foam earpads
TC 2-26 (Art. No. 05115) lightweight stethoscopic headphone
TC 2-36 (Art. No. 05116) stethoscopic headphone with foam earpads
L 1029-75 (Art. No. 03371) charging unit and system case (230 V)
L 1029-75 UK (Art. No. 03543) charging unit and system case (UK)
L 1029-75 120 (Art. No. 03544) charging unit and system case (120 V)
Technical Data
Modulation FM
Carrier frequencies 55 - 1335 kHz
Frequency range 50 - 8,000 Hz
Terminating impedance 25 Ω - 2000 Ω
Headphone socket 3.5 mm, mono, automatic on/off function
Power supply rechargeable batteries; 2.5 V / 170 mAh
Operating time approx. 30 hrs
S / N ratio > 52 dB(A)
Weight approx. 100 g
Subject to alterations.