Filter
Top Products
24
Adjusting settings via the operating menu
Via the “Name” menu item, you can enter a freely selectable name (e.g. the
name of the performer) for the receiver. The name is displayed on the
standard display (see page 7). The name can consist of up to 8 characters
such as:
• letters (without pronounciation marks),
•numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Adjusting the audio output level – “AF Out”
Adjustment range: –24 dB to +18 dB, adjustable in 6-dB steps
Via the “AF Out” menu item, you can adjust the level of the audio output
from the receiver to the input of the connected camera.
Activating/deactivating the automatic lock mode – “Auto Lock”
The lock mode prevents that the volume at the headphone output PHONES
is accidentally adjusted. In addition, the lock mode prevents that the diver-
sity receiver is accidentally switched off or programed during operation.
The lock mode icon ቦ the current standard display indicates that the
lock mode is activated. For information on how to use the lock mode, refer
to page 13.
̈ Press the rocker button to select a character.
̈ Press the SET button to change to the next segment/character
or to store the complete entry.
SET
Call up “
AF Out
”
Select the desired
setting
0 dB
AF Out
0 dB 0 dB
AF Out
Menu
Store the setting
“Stored”
SET
SET
AF Out
+ 6 dB
Active
Auto Lock
Active
Auto Lock
Inactive
Auto Lock
Menu
“Stored”
SET
SET
Call up
“Auto Lock”
Select the desired
setting
Store the setting