Sennheiser 810 Stereo Receiver User Manual


 
3
English
Connecting the transmitter (charging unit)
The rear of the transmitter is fitted
with two audio inputs: A socket
(LINE) for connection to the audio
output or the headphone socket on
your TV, and a microphone socket
(MIC).
Plug in one end of the connecting cable to the audio output or the headphone
socket on your TV, and the other end to the LINE socket on the transmitter.
If your TV set is fitted with a SCART socket, use the supplied adapter.
If your TV does not have a headphone or SCART socket, you can use an
external microphone which is described in the section ACCESSORIES.
Only use one of the two audio inputs on the transmitter (MIC or LINE).
Connect the power cable to the POWER socket on the transmitter. Plug the
power supply into a household electrical outlet.
set 810_93286_0106_Sp7.book Seite 3 Donnerstag, 19. April 2007 4:29 16