Filter
Top Products
7
Positioning the microphone boom towards the
corner of the mouth
For best possible fit and comfort and optimum transmission
quality, the microphone boom has to be adjusted to the shape of
your face.
̈ If necessary, bend the earband again in order to adjust the
angle of the microphone boom.
̈ Adjust the microphone boom:
You can change the length of
the microphone boom by
bending it. Due to the omni-
directional pick-up pattern of
the Ear
Set 1, no particular
distance between microphone
and mouth has to be main
-
tained.
With the Ear Set 4, maintain a
distance of 2 to 3 cm between
microphone and mouth.
̈ Adjust the microphone boom
to the shape of your face.
CAUTION! Damage to the microphone boom
The microphone boom can break or be impaired in
its function when the bend diameter is too small
(<
2 cm) or when you bend it close to the micro-
phone. Also avoid frequent alternate bendings. If
the microphone boom breaks, you can be injured.
̈ Adjust the microphone boom to the shape of
your face as described below.