Filter
Top Products
Using the RS 170
18
Using the RS 170
To switch the product on and to listen to your sound source, proceed as
follows:
Switching the transmitter on and off
Switching the transmitter on
̈ Press the multi-function button ብ for approx. 1 second.
The transmitter switches on. The multi-function button ብ flashes
green, indicating that the transmitter is in enrollment mode.
Once the transmitter has found suitable headphones, it pairs with the
headphones and transmits an audio signal. The multi-function LED µ
of the headphones and the multi-function button ብ of the
transmitter flash slowly.
Sequence of steps Page
1. Make sure that the rechargeable batteries are charged. 17
2. Switch your sound source on. –
3. Switch your transmitter on. 20
4. Switch your headphones on. 20
5. Adjust the desired volume. 21
1s
5s
4
µ