Seiko Group STX1 Stereo Receiver User Manual


 
MEMORY BACKUP FUNCTION
Even after the tuner is turned off, the settings you have made are stored in memory
and will not be erased. If the battery is replaced with a new one, the tuner will
return to the following initial settings.
1. Input method [CLIP]
2. Tuning mode [AUTO]
3. Reference pitch [440 Hz]
4. Note [A]
MOVABLE RANGES OF THE CLIP PORTION
The clip portion of the tuner can be
moved within the range shown in
the illustration. Please note that if
the clip portion is moved or rotated
forcibly beyond those movable
ranges, the tuner may be damaged.
BATTERY CHANGE
When the battery nears its end, the liquid crystal display and the tuning guide will
become dim. In that case, replace the battery with a new one immediately. If the
battery is exhausted, the tuner may not operate properly.
1. Turn off the power.
2. Loosen and remove the screw fixing the battery
hatch, and turn it counterclockwise to remove it.
3. Take out the old battery, and insert a new one
with its (+) side up.
4. Turn the battery hatch clockwise to close it, and
tighten the screw to fix the hatch.
5. Press the power button
repeatedly to turn on
and off the tuner, and check if it operates properly.
Note: Be sure to follow this procedure. Otherwise, the
tuner may not operate properly.
* Be sure to use the specified battery (CR2032).
* Check that the battery is inserted with the (+) side up. Otherwise, it may result in a
malfunction.
* Keep the old battery and the battery hatch beyond the reach of children. If a child swallows
either of them, consult the doctor immediately.
* When disposing of the old battery, observe the regulations of the authorities concerned.
CAUTION ON USING THE TUNER
1. INPUT METHOD : Microphone, built-in sensor
2. MODE : Auto mode/manual mode/sound mode
3. DISPLAY : Liquid crystal display and tuning guide
4. TUNING RANGE : A0 (27.5 Hz) ~ C8 (4186.0 Hz) (when A4 is set to 440 Hz)
5. ACCURACY : ±1 cent
6. REFERENCE NOTE : C4 ~ B4 (at one-semitone steps)
7. REFERENCE PITCH RANGE : 415 Hz and 438 Hz ~ 445 Hz (at 1 Hz steps)
8. ADDITIONAL FUNCTIONS : Auto power off (in 20 min. in auto/manual mode and 5
min. in sound mode), memory backup
9. POWER SUPPLY : Lithium battery CR2032 (3 V), 1 piece
10. OVERALL DIMENSIONS
AND WEIGHT : 77 (W) x 55 (H) x 72 (D) mm, 70 g (including battery)
11. ACCESSORIES : Monitor battery (lithium battery CR2032), 1 piece and
instruction manual
* The design and specifications are subject to change without prior notice for product improvement.
SPECIFICATIONS
If the power button is not pressed properly, or if the battery change procedure
is not performed properly, the tuner may malfunction. In that case, press the
power button
to turn off the tuner immediately. Then, press it again, and check
if the tuner operates properly.