Filter
Top Products
PLAYING A CD
Ï
Ð
Press the Program/Repeat button
during play:
Press once to repeat the track
(song) currently played, The repeat
indicator will come on.
Press twice to repeat all the tracks
(songs) on the disc, The repeat
indicator will flash on and off.
Press a third time to exit repeat
play mode.
Press Stop button to stop CD playing.
n
n
n
Í Press the CD Play/Pause Button:
Press once to play the first track.n
n Press this button in play mode, the
playback will be paused. To
resume playback from the same
point, press the button again.
Ê
Set the Function switch to CD position.
Press the Open button to open the CD
Door, and place and center a CD with
the printed side up into the CD
compartment.
Press the right lower corner of the CD
door to close the lid, the disc will rotate
and the LED Display will show the
disc's total number of tracks.
Ë
Ì
Î To backward skip and forward skip the
track, Press the CD Skip/Search button
( or ) during play to skip to the
desired track. Press the CD Forward
Skip/Search button ( ) to skip to the
next track on the disc. Press the CD
Backward Skip/Search button ( ) to
skip to the beginning of the track
currently playing.
Press and hold the CD Skip/Search
button ( or ) during play to
scan the disc at high speed. When
the desired section of the disc is
found, release the buttons; normal
play will resume.
n
PROGRAM PLAY
PROGRAM BUTTON
Note:
Tracks on the disc can be played in the
desired pre-set order.
Press the CD Program/Repeat button in
stop mode. " " will be shown in the
display.
Select the desired track by using CD
Skip/Search button ( or ).
Press CD Program/Repeat button again
to store the first track into memory. The
Display will show " ".
Repeat 2 to 3 to program
additional tracks; up to 16 tracks can be
programmed in sequence.
When the 10th track is
programmed, the display
shows " ". When more
than 10 tracks are entered, the
display will show
,,,, and
indicating11, 12, 13, 14, 15 and
16th track.
Ê
Ë
Ì
Í steps
Î
Ï
Press the CD Play/Pause button to start
the programmed play. The Display will
show the track number being played,
and the Play/Program indicator will
remain flashing during programmed
play.
All tracks will play in the order you
programmed. If in middle of play if you
want to hear the next programmed track,
press the Skip/Search button ( ).
When all the songs have finished, the
set will stop.
Programming can only be done
when the CD is in the stop mode.
Note:
Ê Tracks on the disc can be played in
random order. Press Random button
during playback. After the current track
is finished, the unit will play tracks in
random order until all tracks are played,
and then stop.
RANDOM PLAY
Ë During random play, the current track
number and random symbol will flash
repeatedly to indicate random play is in
progress.
8
7