Filter
Top Products
Positioning the appliance
1. Do not place your appliance on an unstable cart, stand, shelf or table.
Serious injury to an individual, and damage to the appliance, may result
if it should fall.Your salesperson can recommend approved carts and
stands or shelf and wall mounting instructions. An appliance and cart
combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the
appliance and cart combination to overturn.
2. Slots and openings in the cabinet and in the back or bottom are provid-
ed for ventilation. To ensure reliable operation of the appliance and to
protect it from overheating, these openings must not be blocked or cov-
ered.The openings should never be covered with a cloth or other mate-
rial, and the bottom openings should not be blocked by placing the unit
on a bed, sofa, rug, or other similar surface.This appliance should never
be placed near or over a radiator or heat register.This appliance should
not be placed in a built-in installation such as a bookcase unless prop-
er ventilation is provided.
3. Do not expose the appliance to rain or use near water . . . for example,
near a bathtub, swimming pool, kitchen sink, in a wet basement, etc.
Hooking Up Outdoor Antenna
LIGHTNING PROTECTION FOR YOUR ANTENNA AND SET AS PER NATIONAL ELECTRICAL
CODE INSTRUCTIONS.
EXAMPLE OF ANTENNA GROUNDING ACCORDING TO
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
4. If an outside antenna is connected to the receiver, be sure the antenna
system is grounded so as to provide some protection against voltage
surges and built up static charges.Article 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead
in wire to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
An outside antenna system should not be located in the vicinity of over-
head power lines or other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing an outside anten-
na system extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Plug in the power cord
5. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power com-
pany.This product is equipped with a polarized alternating current line
plug (a plug having one blade wider than the other). This plug will fit
into the power outlet only one way.This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your electrician to replace your
obsolete outlet.Do not defeat the safety purpose of this polarized plug.
Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
6. Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
Cleaning
7. Before cleaning, unplug the unit from the wall outlet. Do not apply
liquid cleaners or aerosol cleaners directly to the unit. Use a dry cloth
for cleaning.
Service & Repair
8. Unplug the appliance from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. If the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the appliance.
C. If the appliance has been exposed to rain or water.
D. If the appliance has been dropped or the cabinet has been damaged.
E. If the appliance exhibits a distinct change in performance.
F. If the appliance does not operate normally by following the operat-
ing instructions, adjust only those controls that are covered in the
operating instructions. Improper adjustment of other controls may
result in damage and will often require extensive work by a
qualified technician to restore the appliance to normal operation.
9. Upon completion of any service or repair, request the service techni-
cian’s assurance that only Factory Authorized Replacement Parts that
have the same characteristics as the original parts were used, and that
routine safety checks have been performed to determine that the appli-
ance is in safe operating condition. Unauthorized substitutions may
result in fire, electrical shock, or other hazards.
10. Never add accessories that have not been specifically designed for use
with this appliance as they may cause hazards.
11. For added protection during a lightning storm, or when the set is left unat-
tended and unused for long periods of time, unplug it from the wall outlet
and disconnect the antenna. This will prevent damage to the set due to
lightning or power line surges.
12. Never push objects of any kind into this product through openings as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind on the
product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE ADHERE TO ALL WARNINGS ON THE PRODUCT AND IN THE OPERATING IN-STRUCTIONS. BEFORE
OPERATING THE PRODUCT, PLEASE READ ALL OF THE SAFETY AND OPERATING INSTRUCTIONS. RETAIN THIS LITERATURE FOR
REFERENCE.
Follow all instructions...
NEC - NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
“Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that pro-
vides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of cable entry as practical.”
This symbol on the nameplate means the product is Listed
by Underwriters’ Laboratories Inc. It is designed and man-
ufactured to meet rigid U.L. safety standards against risk of
fire, casualty, and electrical hazards.
ENERGY STAR
“As an ENERGY STAR
®
Partner, Sanyo
Manufacturing Corporation has deter-
mined that this product meets the ENERGY
STAR
®
guidelines for energy efficiency.”
For your protection in the event of theft or loss of this product, please fill in the information requested below and
KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS.
Model No.__________________ Date of Purchase ___________ Where Purchased_____________________
Serial No.____________________________ ______Purchase Price _______________________
(Located on back of unit)
______
AS
Sanyo Manufacturing Corp. • 3333 Sanyo Road, Forrest City, AR 72335
with a double “Z” is a registered
trademark of Sanyo Manufacturing Corporation.
Trademarks Information:
Manufactured under license from Dolby Laboratories. “Dolby” is a
trademark of Dolby Laboratories.
ON-SCREEN MENU OPERATION
➠
ALL Channel Search
DTV Cable or Add-On Search
Note: This feature is designed to comply with the United States of
America’s FCC V-Chip regulations. Therefore, it may not function
with broadcasts that originate in other countries.
Use this feature to supervise the television viewing of young
children. This TV can be set to automatically block programs with
content you deem as inappropriate for your children to view.
Searching for digital cable
channels will take about 10
minutes, please be patient.
Picture/Sound Manual
Adjustment
After 3 seconds
the TV screen
will display
“Add?”
Channel Scan Memory
The Channel Scan Memory is a list of active chan-
nels that you can customize by deleting and/or
adding channels.
HINT:
Use the CURSOR > key to
select the channel number area.
After 3 seconds the
TV screen will dis-
play “Delete?
V-Guide (Parental Control)
V-GUIDE RATINGS—AT-A-GLANCE
Movie Rating
TV Rating
Content Rating
Blocked
Ratings
(Check Mark
[✔] symbol)
MENU NAVIGATION MAP (Composite)
OPERATING TIPS:
■ When a digital channel is deleted, all of that channel’s sub-
channels are deleted as well.
■ Only previously deleted digital channels can be added back
to the Channel Scan Memory.
■ Channels deleted from Channel Scan Memory can be tuned
using the number keys.
■ If the last remaining digital channel is deleted, the entire previ-
ous Channel Scan Memory list will be restored automatically.
■ If the last remaining analog channel is deleted (cable or off-air
channels), ALL analog channels (cable or off-air) will be
restored automatically, regardless of the previous Analog
Channel Scan Memory list.
All CH Search
DTV Cable Search
DTV Add-on Search
No
Yes
Ana Antenna Signal
Cable
VHF/UHF
CH Scan Memory
Delete?
Add?
Font Size
Font Style
Background Color
Foreground Color
Background Opacity
Foreground Opacity
V-Guide
Off
On
Picture/Sound
Auto
Manual
Menu Language
English
Español
Français
Color
Tint
Contrast
Brightness
Sharpness
Adjust
No
Yes
No
Yes
Default
Digital Caption
Manual
Tone
Important Facts:
•
During Channel Search, current Digital and Analog channel data-
bases are deleted and new ones created. To receive digital cable
channels, if available, you must perform a DTV Cable Search.
To add new digital channels to the existing database, use DTV
Add-on Search. Use the this feature to add new channels to the
digital antenna channel database. Also, use this feature to add
channels when broadcast towers are in multiple directions from
your location.
•
Go to
www.antennaweb.org
and type in your zip code to obtain
specific tower and antenna information.
•
This DTV maintains only one database of digital channels.
Therefore, when you search for ClearQAM digital cable channels,
the database of antenna digital channels will be deleted. You will
be able to receive only those ClearQAM channels your cable
company provides.
OPERATING TIPS:
■ You can block portions of a DTV rating by choosing one or more of the
Content ratings (D, L, S, and V). By blocking just the L and S content ratings
of TV-14, for example, TV-14 rated programs with a D and/or V content
rating could still be viewed.
■ V-Guide rating limits on programming received via the Analog antenna
input, Digital antenna input, Video2 input, and any 480i signals received
through the video Component jacks are controlled by this DTV.
ONE-YEAR LIMITED PARTS AND LABOR WARRANTY
THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE
UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND
PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT APPLY
TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
WARRANTY APPLICATION
FOR ONE YEAR from the date of original retail purchase Sanyo Manufacturing Corporation (SMC) warrants this TV to be free
from manufacturing defects in materials and workmanship under normal use and conditions for parts and labor.
For the FIRST 90 DAYS from the date of original retail purchase, Sanyo Manufacturing Corporation will replace any
defective TV via exchange at the retailer. To ensure proper warranty application, keep the original-dated-sales receipt for
evidence of purchase. Return the defective TV to the retailer along with the receipt and the included accessories, such as
the remote control. The defective TV will be exchanged for the same model, or a replacement model of equal value, if
necessary. Replacement model will be contingent on availability and at the sole discretion of Sanyo Manufacturing
Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
OBLIGATIONS
For one year
from the date of purchase, Sanyo Manufacturing Corporation warrants this product to be free from defects in
material and workmanship under normal use and conditions. During the first 90 days
under this warranty for any manufac-
turing defect or malfunction Sanyo Manufacturing Corporation will provide a new TV via exchange at the retailer.
HOW TO MAKE A CLAIM UNDER THIS WARRANTY
Please call 1-800-877-5032. Please be prepared to give us the television’s model number and serial number when you call.
The model number and serial number are printed on a label attached to the back of the unit.
For customer assistance, call toll free 1-800-877-5032.
Weekdays 7:30 AM – 7:00 PM Central Time
Saturday 7:30 AM – 4:00 PM Central Time
This warranty expresses specific contractual rights; retail purchasers may have additional statutory rights which vary from
state to state.
(EFFECTIVE: March 1, 2007)
HOW TO OPERATE THE MENU
NOTES:
■
Some Menu options are specific to Digital and
Analog signals. To access these options, you
must first tune the DTV to a digital or analog
channel.
■
“Not available” will be displayed on the screen if
an unavailable menu option is selected.
1
Press the MENU key to display the Main menu.
2
Use the CURSOR ▲▼ keys to highlight menu
item.
3
Use the CURSOR < > keys to select or adjust
menu item.
4
Press ENTER to activate setting, if needed.
5
When you have finished making adjustments,
press the EXIT key to return to normal TV
viewing.
Note: For menu items that have sub menus, follow
on-screen instructions to select and make
adjustments.
HT30547—1JC6P1P0256-- 6/5/07 2:55 PM Page 2