-E23-
Program Mode
All Clear
1 03 6 -- 11 -- 16 --
2 -- 7 -- 12 -- 17 --
3 -- 8 -- 13 -- 18 --
4 -- 9 -- 14 -- 19 --
5 -- 10 -- 15 -- 20 --
1
1
2
CLEAR
2
n (Stop)
3
5
Programmed Playback [CD]
Up to 20 selections can be programmed.
Programming procedure
1. Press [PROGRAM/RANDOM] twice in the stop mode.
•“Program Mode” screen appears on the TV screen.
•“PGM” blinks on the FL display.
2. Press the number buttons to select the track number.
Example:
To select Track No.3, press [0], then [3].
To select Track No.10, press [1], then [0].
To select Track No.24, press [2], then [4].
Notes:
• If you make a mistake, press [CLEAR].
• To quit the “Program Mode” screen, press [PROGRAM/
RANDOM].
3. Press [p] to move the highlighted box down.
Example:
4. Repeat steps 2 and 3 as above to select another track.
5. Press [a] to start playback.
•“PGM” remains lit on the FL display.
When all programmed selections have played, the unit stops
automatically.
• The program contents are retained in memory.
Note:
To play the program again, press [PROGRAM/RANDOM] twice
to call up the “Program Mode” screen, then press [a].
Random Playback [CD]
1. Press [PROGRAM/RANDOM] once in the stop mode.
•“Random” appears on the TV screen.
•“RND” blinks on the FL display.
2. Press [a] to begin random playback.
•“RND” remains lit on the FL display.
The unit will automatically select tracks at random.
Notes:
• To stop random playback, press [n].
• The A-B REP and SEARCH MODE modes do not work
during Random Playback.
To clear the program one by one
1. Press [PROGRAM/RANDOM] twice to display the “Program
Mode” screen.
2. Press [4] or [5] to select the track number.
3. Press [CLEAR].
To clear all the programs
1. Press [PROGRAM/RANDOM] twice to display the “Program
Mode” screen.
2. Press [4] to select “All Clear”.
3. Press [ENTER].
To change the program
1. Press [PROGRAM/RANDOM] twice to display the “Program
Mode” screen.
2. Press [4] or [5] to select the track number.
3. Press the number buttons to select the track number to be
replaced.
Note:
To quit the “Program Mode” screen, press [PROGRAM/
RANDOM].