Sangean Electronics DT400W Stereo Receiver User Manual


 
12
4. Press the WX button to confirm the setting.
5. Press the POWER button to turn off the radio.
And the ALERT indicator flashes every 3 seconds and
the word “ALERT” is shown on the display. You can
press the WX button and the display shows the
Weather Alert channel and remained time.
6. When the Weather Alert sounds, press any button to
enter the Weather Band.
7. When the set Alert time is elapsed, the Alert
is deactivated.
* There is no memory preset for Weather band.
About Weather Band standby mode:
1. Reception: The reception related to the distance to
the ratio station, broadcast signal strength,
earphone allocation and so. Try to stretch out the
earphone to get better reception.
2. Weather broadcasts usually transmit signal every
Wednesday noon time. You can text your alarm
at this time.
3. Alarm standby mode consumes power.
4. When the battery is low, and changing battery
eliminate the alarm set.