Sangean Electronics DT-110 Stereo System User Manual


 
tuning step is 10 kHz. On other countries is 9
kHz.
To change AM band tuning step, please follow
below steps.
1. change AM band tuning step from 9 kHz to
10kHz.
Turn off the power by pressing On/Off button
, press Tuning Control button Up conti-
nuously then turn on the power by pressing
On/Off button again. Release the buttons the
AM tuning step will now change to 10 kHz.
2. change AM band tuning step from 10 kHz to
9 kHz
Turn off the power by pressing On/Off button
, press Tuning Control button Down
continuously and then turn on the power by
pressing On/Off button again. Release the bu-
ttons, the AM tuning step will change to 9 kHz.
15
1
4
1
3