Filter
Top Products
Turning the headset on or off
To turn the headset on, press and hold [ ] until the
indicator light ashes blue 4 times.
To turn the headset off, press and hold [
] until the
indicator light sequentially ashes blue and red.
Pairing with your Bluetooth phone
1 Enter Pairing mode.
If you turn the headset on for the rst time, it
proceeds into Pairing mode immediately.
Make sure that the headset is off, and press and
hold [
] until the indicator light turns on blue and
stays lit after blinking.
2
Search for and connect with your phone according
to your phone user's guide. (Bluetooth PIN: 0000, 4
zeros).
•
•
•
•
NOTE:
When the headset and the phone are paired, the headset
attempts to reconnect automatically each time it turns on.
Otherwise, press [
] to reconnect.
Using call functions
Some features may not be supported by your phone.
When the headset is idle (in standby mode),
Press
[
] to:
Answer an incoming call
Make a voice-activated call
Press and hold [
] to:
Redial the last number called
Reject an incoming call
•
•
•
•
When the headset has a call in progress,
Press [
] to:
End a call
Transfer a call from the phone to the headset
End the rst call and answer a second call
Press and hold [
] to:
Place a call on hold
Place the rst call on hold and answer a second call
R
etrieve a call on hold
Press [
+]
or [-] to adjust the volume.
Press and hold [+]
or [-] to turn the microphone off or
on.
Press and hold [+] and [-] to turn the indicator light on
or off.
•
•
•
•
•
•
Specications
Item Specications and description
Bluetooth version 2.0+EDR
Support prole Headset Prole, Hands-Free Prole
Oper
ating range Up to 30 feet (10 meters)
Standby time Up to 150 hours*
Talk time Up to 6 hours*
Charging time Approximately 2 hours*
* Depending on the phone type and usage, the actual time may
vary.