Filter
Top Products
ENGLISH
7979
IEEE 1394 Data Transfer
●
System requirements
■
CPU : faster Intel
®
Pentium III™ 450Mhz compatible.
■
Operating system : Windows
®
98SE, ME, XP, Mac OS (9.1~10.2)
■
Main memory : more than 64 MB RAM
■
IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV connection cable
(VP-D200i/D230i/D250i/D270i only)
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) from the DV IN/OUT port of
the camcorder to the DV IN/OUT port of the other DV device.
■
Make sure that DV IN appears on the screen.
3. Press the START/STOP button to begin REC PAUSE mode.
■
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
■
If you want to pause recording momentarily, press the START/STOP button again.
6. To stop recording, press the (STOP) button.
Notes
■
When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
■
Operations are not guaranteed for all the recommanded computer environments mentioned above.
00709E VP-D230(i) UK (61~108) 12/1/03 9:09 AM Page 79