Samsung VP-D230(I) Stereo Amplifier User Manual


 
Basic Recording
28
ENGLISH
Making your First Recording
1. Connect a Power source to the
camcorder. (see page 23)
(A battery pack or a AC power
adapter)
Insert a cassette.
(see page 27)
2. Remove the LENS CAP.
3. Set the power switch to the
CAM position.
Open the LCD monitor.
Set the mode switch to the
TAPE position.
(VP-D230(i)/D250(i)/D270(i) only)
Make sure that STBY is displayed.
If the protection tab of the cassette is open, STOP and
PROTECTION! will be displayed.
Make sure the image you want to record appears in the LCD
monitor or viewfinder.
Make sure the battery level indicates that there is enough remaining
power for your expected recording time.
4. To start recording, press the START/STOP button.
REC is displayed in the LCD.
To stop recording, press the START/STOP button again.
STBY is displayed in the LCD.
1.
23
27
2. LENS CAP
3. CAM
LCD
STBY
( VP-D230(i)/D250(i)/
D270(i))
STOP
PROTECTION
LCD
4. START/STOP /
REC
START/STOP /
STBY
FADE
S.SHOW
4
1
3
2