Filter
Top Products
ENGLISH
Preparation
2626
Battery level display
•
The battery level display indicates the amount of power
remaining in the battery pack.
a. Fully charged
b. 20~40% used
c. 40~80% used
d. 80~95% used
e. Completely used (flickers)
(The camcorder will turn off soon,
change the battery as soon as possible)
✤ Please refer to the table on page 25 for approximate continuous
recording times.
✤ The recording time is affected by environmental temperature and
conditions.
The recording time becomes very short in a cold environment.
The continuous recording times in the operating instructions are
measured using a fully charged battery pack at 77°F(25°C).
As the environmental temperature and conditions may differ when you
actually use the camcorder, the remaining battery time may not be the
same as the approximate continuous recording times given in these
instructions.
Tips for Battery Identification
A charge mark is provided on the battery pack to help you
remember whether it has been charged or not.
Two colours are provided (red and grey)-you may choose
which one indicates charged and which indicates
discharged. (SB-LS110 only)
a
b
c
d
e
•
a.
b. 20~40%
c. 40~80%
d.
80~95%
e.
✤ 25
✤
77°F 25°C
( SB-LS110)