Filter
Top Products
Setting Up the Device Driver
9
◆
Automatic Setup
1 Insert the setup diskette in the diskette drive and change the directory to A:,
where A: is the diskette drive.
To do so, type A: after the C:\ prompt and press [Enter].
2 Type CDSETUP and press [Enter].
3 Reboot the computer.
◆
Manual Setup
LAST DRIVE = Z
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
DEVICE = C :\SAMSUNG\SSCDROM.SYS /D : SSCD000 /V
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C :\SAMSUNG\MSCDEX /D:SSCD000
Installing the CD Record Utility
8
To record data on a CD-R or CD-RW disc in the CD-R/RW drive, you must first
install the CD record utility. For compatibility reasons, you are recommended to
uninstall any existing software of the same type before installing this utility.
1 Insert the disc supplied with the CD-R/RW drive in the drive.
2 Follow the instructions displayed on the screen to install the utility. Refer to
the separate utility documentation for further details.
3 Copy the SHELLEX.DLL file from the root directory on the disc to the
DIRECT CD folder. This patch file handles possible errors detected after
checking the DIRECT CD properties in the Windows Explorer.
4 Store the utility disc in a safe place.
The SAMSUNG device driver enables discs in the CD-R/RW drive to be read but not
recorded in an MS-DOS environment; the driver is located in the D driver folder on
the CD record utility disc.
No additional device driver is needed for Windows 95/98/NT, as the default
Windows device driver is used.
You can check that the CD-R/RW drive has
been correctly detected by Windows. To do so, proceed as follows.
Installing the Device Driver
1 Make the C:\SAMSUNG directory.
2 Copy the files from the diskette to the C:\SAMSUNG directory.
To do so, type COPY A:
*
.
*
C:\SAMSUNG after the C:\ prompt and press
[Enter].
3 Edit the CONFIG.SYS file.
Add the DEVICE=C:\SAMSUNG\SSCDROM.SYS \D:SSCD000 /V entry.
4 Edit the AUTOEXEC.BAT file.
Add the C:\SAMSUNG\MSCDEX /D:SSCD000 entry.
5 Reboot the computer.
1 Double-click on the My Computer icon on your desktop.
2 Double-click on the Control Panel folder.
3 Double-click on the System icon.
4 Click on the Device Manager tab.
5 Expand the CD-ROM branch.
The SAMSUNG CD-R/RW SW -
***
device name is displayed.