Filter
Top Products
03 Functions
2. Press the MIC VOL-, + button on the
remote control to adjust the volume of
the microphone.
3. Press the MY KARAOKE button on the
remote control to suppress the vocal if you
need to. Each time you press the button,
the selection changes as follows:
MY KARAOKE ON
;
MY KARAOKE OFF
•
If you hear strange noises (squealing
or howling) while using the Karaoke
feature, move the microphone away
from the speakers. Turning down the
microphone's volume or the speaker
volume is also effective. Do not aim the
MICROPHONE towards the SPEAKERS.
•
The microphone does not operate in the
AUX and TUNER mode.
•
If you connect a microphone, GIGA
SOUND automatically turns off. To turn
Giga Sound back on, you must remove
the microphone, and then press the
GIGA SOUND BEAT button.
•
When My Karaoke is on, GIGA SOUND
does not work.
•
When you turn My Karaoke off, all My
Karaoke settings are lost.
•
My Karaoke is only available when a
microphone is connected to the Hi-Fi
Component.
•
My Karaoke does not operate in the
Bluetooth, TV SoundConnect, FM, or
AUX mode.
Auto Change Function
You can play a disc followed by a USB device
connected to USB1 and/or USB2 continuously.
1. Press the AUTO CHANGE button to select
a mode, and then press
¬
to apply your
selection.
•
If Program Play has not been set in
CD/USB mode, the settings change as
follows: AUTO CHANGE OFF
;
AUTO
CHANGE ALL
•
If Program Play has been set in CD/USB
mode, the settings change as follows:
AUTO CHANGE OFF
;
AUTO CHANGE
ALL
;
AUTO CHANGE PROGRAM
-
When the AUTO CHANGE mode is
"ALL", the Hi-Fi Component plays
supported music from DISC, USB1,
and USB2 continuously.
-
When the auto change mode is
"PROGRAM", the Hi-Fi Component
plays programmed music from
a disc in the disc slot, then plays
programmed files on a USB device
connected to USB1, and then plays
programmed files on a USB device
connected to USB2. The files are
played continuously. See Using the
Program Function on page 15.
-
If you press the POWER button,
another function button, or the EJECT
button, the AUTO CHANGE function
automatically switches to "OFF" mode.
-
When the Auto Change mode is "ALL
or PROGRAM", the main unit cannot
record.
-
When the Auto Change mode is "ALL
or PROGRAM", the REPEAT function
automatically switches to OFF.
-
When the Auto Change mode is "ALL"
or "PROGRAM", the REC SPEED and
USB REC functions do not work.
-
When the DISC play ends, if there's
no device connected to USB1 and/or
USB2, the unit will continue to play
the disc.
-
When USB play ends, if there's no disc
in the unit, the unit will continue to
play music from USB1 and/or USB2.
-
When USB is playing, if you
disconnected the USB, the AUTO
CHANGE function automatically
switches to "OFF" mode.
-
If there is no device connected to
USB1, the unit jumps to USB2.
21 English
[MX-HS8500-ZA]AH68-02706A-03ENG.indd 21 2014-05-23 오후 2:43:08