Filter
Top Products
12 English English 13
Basic Functions
Listening to the Radio
To Store the Stations You Want
You can store up to:
15 FM stations.
1. Select FM by pressing the TUNER/AUX button.
2. To search for a station, press the TUNNING MODE
button on the remote control or the STOP button on
the product one or more times until MANUAL is
displayed.
3. Select a station by:
• Pressing the TUNING/ALBUM
,
or
.
button on
the remote control to find a station.
4. Press the MO/ST button to switch between stereo and
mono.
• In a poor reception area, select MONO for a
clear, interference-free broadcast.
• This applies only when you are listening to an FM
station.
5. If you do not want to store the radio station found, go
back to Step 3 and search for another station.
Otherwise:
a. Press the ENTER button.
b. Or, press the TUNING/ALBUM button on the
remote control to select a program number.
c. Press the ENTER button to save the preset.
6. To store other radio frequencies, repeat Steps 3, 4,
and 5.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1. Select FM by pressing the TUNER/AUX button on
the product or remote control.
2. Press the TUNING MODE button on the remote
control until “PRESET” is displayed.
3. Pres
s [,] button on the main unit or TUNING/
ALBUM , , .
on the remote control to select a
preset number.
` When My Karaoke is on, EQ and GIGA SOUND do
not work.
` When you stop playing the CD or USB, My Karaoke
turns off automatically.
` My Karaoke is only available when a microphone is
connected to the HI-Fi Component.
10 Skip Function
Press the +10 or -10 button while the unit is in
playback mode. The unit will skip as many as 10
tracks forward or 10 tracks back from the current
track.
Auto Change Function
You can set the product to play a disc, and then
play files on USB devices connected to USB 1
and USB 2 continuously.
1. Press the AUTO CHANGE button on the remote.
Each time you press this button, the mode
switches as follows:
AUTO CHANGE OFF
;
AUTO CHANGE ON
• When AUTO CHANGE is "ON",
- The Hi-Fi Component will play a disc in the disc slot,
then play files on a USB device connected to USB1,
and then play files on a USB device connected to
USB2. The files will be played continuously.
- If you press the POWER button, function change
button, or the EJECT button, the AUTO CHANGE
function automatically turns "OFF".
- Recording is disabled.
- The REPEAT and SLEEP functions are automatically
set to OFF and are unavailable.
- The CD REC SPEED, USB REC, PROGRAM and
DELETE functions unavailable.
• If you disconnect a playing USB device, the AUTO
CHANGE function automatically turns "OFF".
• If there's no device in USB1, the function automatically
switches to USB2.
MX-FS8000-ZA-ENG_130401.indd 13 2013-04-01 �� 2:24:39