Samsung MXF630BZA CD Player User Manual


 
6 English English 6
English 7
1
2
3
4
1. 2.0 CH Speaker Connector Terminals
The speaker connector terminals are located on
the rear of the system.
1.
To achieve the correct sound quality, insert the
speaker connector cables identified below into
the correct speaker terminals on the back of
the system.
• Leftspeaker(markedL).
• Rightspeaker(markedR).
2. ONLY FOR SERVICE
• Thisjackisforserviceonly.Pleasedonotuse.
3. AUX IN Terminals
1.
Use an Audio Cable (not supplied) to connect
AUX IN on the product to Audio Out on an
external analog component.
• Besuretomatchconnectorcolors.
• Iftheexternalanalogcomponenthasonlyone
AudioOutjack,connecttoeithertheleftor
rightterminal.
• PresstheTUNER/AUXbuttontoselectthe
AUXinput.
• WhentheunitisinAUXmode,ifnoneof
thebuttonsonthefrontpanelarepushed
formorethan8hours,thepowerwill
automaticallyturnoff.
4. FM Antenna Connector Terminal
1.
Connect the FM antenna (supplied) to the FM
Antenna jack.
2.
Slowly move the antenna wire until you find a
location where reception is good, then fasten it
to a wall or other rigid surface.
3.
If
reception is poor, you may need to install an out-
door antenna. To do so, connect an outdoor FM
antenna to the FM socket on the rear of the system
using a 75Ω coaxial cable (not supplied).
Rear Panel
MX-F630B-F730B-ZA-ENG-0201-EQ.indd 7 2013-2-19 9:33:08