Filter
Top Products
ENG
18
4
1
3
33
5
You can rip a compact disc as a MP3 file on the USB
This feature enables you to ripping with the start of the disc or track
of your choice.
Switch the system on by pressing STANDBY/ON.
Connect the USB.
Load a compact disc(Digital Audio).
Press the OPEN/CLOSE button to open the CD door.
Insert a CD and press the OPEN/CLOSE button to close the CD
door.
Use the CD selection ( or
) buttons to select the desired
song.
Press CD RIPPING button on remote control to starting ripping.
If the system is playing state, p
ress this button, “TRACK RIPPING”
is displayed and CD RIPPING starts.
If the system is playing state, p
ress and hold this button, “FULL CD
RIPPING” is displayed and CD RIPPING starts.
During CD ripping, do not disconnect USB device.
To stop ripping, press STOP(
)button.and then automatically create
and save as the MP3 file.
After CD-Ripping,a directory named “RIPPING FOLDER” will be
created in your device, and the file name is same with the disc.
CD RIPPING Function
1
2
3
4
5
Note
Don’t disconnected USB and AC Cord during CD-Ripping. This may
◆
cause the file damage. If you want to stop CD-Ripping during
CD-Ripping, you must press stop key first and after the CD Stopped,
then you can remove the USB device.
If you disconnected USB device when CD Ripping, the main unit will be
◆
power off and you may not delete the ripped file, In this case, please
connect the USB on the PC and backup the USB data on the PC first
and then formate the USB device .
When the USB memory is not enough, it will be displayed “RIPPING
◆
ERROR”.
With external HDD, FAT format the USB can be CD Ripping, but not
◆
NTFS. The CD Ripping function of this product does not support all USB
devices.
When you use CD high speed search function or in the Pause or Stop
◆
mode, the CD Ripping can’t work.
During CD Ripping, do not deal impact. If is shocked while CD Ripping,
◆
CD Ripping maybe disengage.
Sometimes, some of USB devices, CD Ripping time is long.
◆
In program mode, you can't use CD RIPPING function.
◆
MM-G35-EUR-ENG-F.indd 18MM-G35-EUR-ENG-F.indd 18 2009-5-4 14:27:492009-5-4 14:27:49