Filter
Top Products
49 50
Listening to Radio
Presetting Stations
You can store up to:
15 FM stations
RADIO OPERATION
1 Press the TUNER button to select the FM band.
2 Tune in to the desired station.
Automatic Tuning 1 : When the button is pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the button to automatically search for active
broadcasting stations.
Manual Tuning : Briefly press the button to increase or decrease the frequency incrementally.
1 Press the FUNCTION button to select the FM band.
2 Select a broadcast station.
Automatic Tuning 1 : Press the STOP () button to select <PRESET> and then press
the button to select the preset station.
Automatic Tuning 2 : Press the STOP () button to select <MANUAL> and then press and hold
the button to automatically search the band.
Manual Tuning : Press the STOP () button to select <MANUAL> and then briefly press
the button to tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
Each time the button is pressed, the sound switches between <STEREO> and <MONO>.
In a poor reception area, select MONO for a clear, interference-free broadcast.
,
,
Remote Control
Main Unit
Example : Presetting FM 89.10 in the memory
• This unit does not receive AM broadcasts.
1 Press the TUNER button to select the FM band.
2 Press the button to select <89.10>.
3 Press the TUNER MEMORY button.
<PROGRAM> flashes in the display.
4 Press the button to select preset number.
You can select between 1 and 15 presets.
5 Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before <PROGRAM> disappears from the display.
<PROGRAM> disappears from the display and the station is stored in memory.
6 To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the button on the remote
control to select a channel.
,
kHz
MHz
kHz
PROGRAM
MHz
kHz
PROGRAM
MHz
36P~76P(DX75/76)-NO GB 2007.4.23 10:36 AM Page 40