Samsung HW-H551/ZA Speaker System User Manual


 
11
ENG
CONNECTIONS
CONNECTING THE WIRELESS SUBWOOFER
The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link
(connect wirelessly) automatically when the main unit is turned on. If the LINK indicator does not light
when the main unit and subwoofer are turned on, please set the ID by following the procedure below.
1. Plug the power cords of the main unit and subwoofer into an AC wall outlet.
2. Press the ID SET button on the back of the subwoofer with a small, pointed object for 5 seconds.
• The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly.
3. While the main unit is powered off (
STANDBY
mode),
press MUTE on the remote control for 5 seconds.
4. The ID SET message appears on the main unit’s OLED display.
5. To finalize the link, turn the main unit’s power on while the
subwoofer’s LINK LED blinks.
• The main unit and the subwoofer are now linked (connected).
• The LINK indicator (blue LED) on the subwoofer is turned on.
• You can enjoy better sound from the wireless subwoofer by selecting a sound effect. (See page 20)
Before moving or installing the product, be sure to turn off the power and disconnect
the power cord.
If the main unit is powered off, the wireless subwoofer will be in the standby mode and
the STANDBY LED on the upper side will come on after the LINK indicator (Blue LED)
blinks for 30 seconds.
If you use a device that uses the same frequency (2.4GHz) near the system, interference
may cause some sound interruption.
The maximum wireless signal transmission distance between the main unit and
subwoofer is about 33 ft., but may vary depending on your operating environment. If a
steel-concrete or metallic wall is between the main unit and the wireless subwoofer, the
system may not operate at all, because the wireless signal cannot penetrate metal.
If the main unit doesn't make a wireless connection, follow steps 1-5 above to retry the
connection between the main unit and wireless subwoofer.
The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away
from water and moisture.
For optimal listening performance, make sure that the area around the wireless
subwoofer location is clear of any obstructions.
POWER
TV POWER
POWER
TV POWER
REPEAT
TV VOL TV CH
AUDIO SYNC
SOURCE
AUTO
POWER
SPEAKER
TV SOURCE
TV PRE-CH
TV EXIT
SMART VOLUMESOUND EFFECT
S/W
LEVEL
S/W
LEVEL
VOL
VOL
Surr.Sound
TONE
TV INFOTV MUTE
SoundConnect
MUTE
PO
WER
TV P
O
WER
R
EPEAT
T
V V
OL
T
V
C
H
AUDI
O
S
YN
C
SO
UR
CE
AUT
O
PO
WER
S
PEAKE
R
TV
SO
UR
CE
T
V PRE-
C
H
TV EXIT
S
MART V
O
LUM
E
SO
UND EFFE
C
T
S
/W
L
EVEL
S
/W
L
EVE
L
V
OL
V
OL
Surr.Sound
S
TO
N
E
TV INF
O
T
V MUT
E
Sou
n
dCo
nn
ect
TV MUTE
STANDBY
LINK
ID SET
ID SET