Filter
Top Products
47
ENG
● OPERATION
LISTENING TO THE RADIO
You can listen to the radio by using either automatic or manual tuning.
Press the INPUT SELECT button to select FM.
Select a frequency (radio broadcast).
Preset tuning :
Press the #,$ buttons on the remote control to select the preset frequency.
Manual tuning 1 (Automatic tuning):
Press and hold the TUNING/CH ( .,, ) buttons on the remote control to automatically tune in a
frequency.
Manual tuning 2 :
Press the TUNING/CH ( .,, ) buttons on the remote control to increase or decrease the
frequency step by step.
You can also use the SELECT (.,,) button on the main uint to change the radio frequency.
To Listen in mono/stereo
Press the MO/ST button on the remote control.
Each time you press this button, STEREO or MONO will be selected in turn.
If you select MONO in an area with weak reception, it will help to reduce noise.
This function works only with the remote control.
Presetting radio stations
You can preset up to 30 FM stations.
E.g.: Setting station FM 89.10 in preset 2.
Press the INPUT SELECT button to select FM.
Press the TUNING/CH ( .,, ) buttons on the remote control
to select 89.10.
Refer to step 2 above to tune in automatically and manually.
Press the MEMORY button on the main unit.
You can also use the TUNER MEMORY button on the
remote control.
Tuner number will blink on the display.
Press the TUNING/CH ( .,, ) buttons on the remote control
to select preset 2.
You can select from presets 1 to 30.
Press the MEMORY button on the main unit.
Tuner number will disappear and station 89.10 will be
saved in preset 2.
To preset other stations, repeat steps 2 to 5.
To Listen to Preset Station
Press the TUNING MODE button to select PRESET and press the SELECT ( .,, ) buttons.
1.
2.
•
•
•
M
•
•
•
1.
2.
•
3.
•
•
4.
•
5.
•
6.
•
Æ
Æ
Æ
HW-C700-C770S-C770BS-XAC_0616.in47 47HW-C700-C770S-C770BS-XAC_0616.in47 47 2010-06-17 10:08:042010-06-17 10:08:04