Filter
Top Products
15
•
This unit does not receive AM broadcasts.
Note
Connecting the FM Antenna
Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.
Slowly move the antenna wire around until you find a location where reception is good,
then fasten it to a wall or other rigid surface.
FM Antenna (supplied)
1
2
GB
16
CONNECTIONS
Connecting External Components
Connect AUX (Audio) In on the Home Theater to Audio Out on the external analog
component.
•
Be sure to match connector colors.
1
Press AUX button on the remote control to select ‘AUX’ input.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: FM ➝ DVD/CD ➝ AUX
2
Example: Analog signal components such as a VCR.
Connecting an External Analog Component
Audio Cable
(not supplied)
If the external analog compo-
nent has only one Audio Out,
connect either left or right.
•
You can connect the Video Output jack on your VCR to the TV, and connect the Audio
Output jacks on the VCR to this product.
Note
HT-Z110(1~40P) GB-RDS 2008.2.18 9:24 AM Page 18