Filter
Top Products
GB
17
CONNECTIONS
18
HDMI Function(Con’t)
Resolution Selection
•
This function allows the user to select screen resolution for HDMI output.
In Stop mode, press and hold the SD/HD (Standard
Definition/High Definition)button on the remote control.
•
Resolutions available for the HDMI output are 576p(480p), 720p
and 1080i.
•
SD(Standard Definition) resolution is 576p(480p) and HD(High Definition)
resolution is 720p/1080i.
Example: If the TV supports resolution up to 576p(480p):
Press the SD/HD button.
•
A 576p(480p) video signal is output through the HDMI output.
•
If the TV does not support the configured resolution, you will not be able
to see the picture properly.
• You do not have to make separate adjustments, since the Home
Theater and TV will be automatically adjust themselves to the
optimal resolution and aspect ratio if connected to HDMI. (If the TV
is an HDTV and has an HDMI Input jack, output is automatically
converted to 1080i resolution (if supported by the TV).)
• See your TV owner's manual for more information on how to select
the TV's Video Input source.
Note
Connecting External Components
Connect AUX (Audio) In on the Home Theater to Audio Out on the external analog compo-
nent.
•
Be sure to match connector colors.
1
Press AUX button on the remote control to select ‘AUX’ input.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ AUX ➝ USB ➝ FM
2
Example: Analog signal components such as a VCR.
Connecting an External Analog Component
Audio Cable
(not supplied)
If the external analog compo-
nent has only one Audio Out,
connect either left or right.
•
You can connect the Video Output jack on your VCR to the TV, and connect the Audio
Output jacks on the VCR to this product.
Note
THQ22(1~40P) GB 2006.5.16 2:41 PM Page 20