Filter
Top Products
23
ENG
24
CONNECTIONS
Connecting the FM Antenna
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
•
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
•
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
Cooling Fan
Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.
Slowly move the antenna wire around until you find a location where reception is good, then fas-
ten it to a wall or other rigid surface.
FM Antenna (supplied)
Connecting an optional XM Satellite Radio Antenna
•
To ensure optimal reception of XM’s satellite signal, the XM Antenna should be placed at or near a souther-
ly facing window with nothing obstructing its path to the sky. You can mount it indoors or outdoors.
•
When making connections, also refer to the operation instructions of the XM Antenna.
•
Depending on your location, the radio signal may be weak or cannot be tuned .
XM Antenna (Sold separately)
Notes
•
This unit does not receive AM broadcasts.
Notes
Connect the XM Antenna(Sold separately) to the XM Antenna Connector on the rear of this unit.
1
2
Q80/85(1~46)_XAA_ENG 2003.3.1 5:36 PM Page 26