Samsung HT-C5200 Home Theater System User Manual


 
24 English
Connections
Wireless Network
You can connect to the network with a Wireless IP sharer.
A wireless AP/IP router is required to make a wireless network connection. Connect the wireless
LAN adapter to the Wireless LAN Adapter on the rear panel of the product.
Set the network options. (See page 35)
NOTE
This product is compatible with only Samsung's Wireless LAN Adapter. (not supplied) (Model name: WIS09ABGN).
- The Samsung Wireless LAN Adapter is sold separately. Contact a Samsung Electronics retailer for purchasing.
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the
wireless network.)
Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance, obstacles,
interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
When applying the security key for the AP (wireless IP sharer), only the following is supported.
Authentication Mode : WEP, WPAPSK, WPA2PSK
Encryption Type : WEP, AES
For the AllShare function, a PC must be connected in the network as shown in the fi gure.
Connecting the FM Antenna
Connect the FM antenna supplied to the FM
75Ω COAXIAL Jack.
Slowly move the antenna wire around until you
fi nd a location where reception is good, then
fasten it to a wall or other rigid surface.
NOTE
This product does not receive AM broadcasts.
1.
2.
1)
2)
1.
2.
COMPONENT OUT
VIDEO OUT
LAN
AUX
OUT
WIRELESS LAN
C
OMPONENT OU
T
V
IDEO OU
T
LAN
AUX
OU
T
Wireless IP sharer
Wireless LAN Adapter
(not included)
Networking with PC for
AllShare function
(See pages 58~59)
PC
Broadband
service
DIGITAL
AUDIO IN
FM ANT.
iPod
OPTICAL
DIGITAL
AUDIO IN
iP
o
d
FM Antenna (supplied)
HT-C5200_ELS_ENG_0303.indd 24HT-C5200_ELS_ENG_0303.indd 24 2010-03-03  9:25:092010-03-03  9:25:09