Filter
Top Products
29
ENG
CONNECTIONS
Case 2 : Connecting to a Wireless IP sharer
You can connect to network with a Wireless IP sharer. See page 50 for Wireless Network Setup.
This unit is compatible with the Samsung Wireless LAN Adapter only.
(Model name: WIS09ABGN).
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended
for stable operation of the wireless network.)
Wireless LAN, in its nature, may cause interference, depending on the use condition
(AP performance, distance, obstacle, interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
When applying the security key for the AP (wireless IP sharer), only the following is
supported.
Authentication Mode : WEP, WPAPSK, WPA2PSK
Encryption Type : WEP, TKIP, AES
Connect the Wireless Lan Adapter to only the Wireless Lan Jack on the back of the main
unit.
M
1)
2)
Modem Port
Wireless IP sharer
Modem Cable
Wireless LAN Adapter
OR
HT-BD8200_XAA_0724-1.indd 29HT-BD8200_XAA_0724-1.indd 29 2009-07-24 11:10:042009-07-24 11:10:04