Filter
Top Products
Presetting Radio Stations
You can preset up to 30 FM and AM stations.
36
Press TUNER button.
•
Each time you press this button, FM ➝ AM will be selected in turn.
Press Select button and then TUNING/CH( ) button to
select 89.1.
•
Refer to step 2, page 35, to tune in automatically and manually.
Press TUNER MEMORY button.
•
Tuner number will blink on the display.
Press TUNING/CH( ) button to select preset 2.
•
You can select from presets 1 to 30.
Press TUNER MEMORY button.
•
Tuner number will disappear and station 89.1 will be saved in preset 2.
To preset other stations, repeat steps 2 to 5.
To Listen to Preset Station
•
Press Select button of the remote control to select the PRESET and press
TUNING/CH ( ) button.
Ex) If you preset FM 89.1 station in 2ch
REMOTE CONTROL
1
2
4
5
6
3
,
,
,
RADIO OPERATION
Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual
tuning operation.
35
Press TUNER button.
•
Each time you press this button, FM ➝ AM will be repetitively
selected.
Select frequency.
•
Automatic Tuning 1 :
1) Press ENTER button to select PRESET.
2) Press TUNING/CH( ) button to select the preset
frequency.
•
Automatic Tuning 2 :
1) Press ENTER button to select MANUAL
2) Press and hold TUNING/CH( ) button to
automatically tune in frequency.
•
Manual Tuning :
1) Press ENTER button to select MANUAL.
2) Press TUNING/CH( ) button briefly to increase or
decrease frequency by step by step.
Press INPUT button to select FM or
AM.
Select the frequency.
•
Automatic Tuning :
Press and hold TUNING/CH( ) button to
automatically tune in frequency.
•
Manual Tuning :
Press TUNING/CH( ) button briefly to
increase or decrease frequency step by step.
To Listen to Mono/Stereo
Press MO/ST button on the remote.
•
Each time you press this button, STEREO, MONO will
be selected in turn.
•
If you select MONO in the area with weak reception,
it will help to reduce noise.
•
This function works only with the Remote Control.
REMOTE CONTROL MAIN UNIT
1
2
1
2
,
,
,
,
,
How to select PRESET, MANUAL
1. Press the SETUP button.
2. Press the INPUT button 8 times.
3. Press the SURROUND button and
select Manual or Preset.
•
This function operates only with the main unit.