Filter
Top Products
GB
62
To tune in to a preset station, press on the
remote control to select a channel.
•
Refer to Step 2 on page 61 to
automatically or manually tune in
to a station.
21
•
“PRGM” flashes in the display.
3
Example: Presetting FM 89.10 in the memory
Press TUNING/CH
to select "89.10".
Press the TUNER
button to select the
FM band.
•
Press the TUNER MEMORY button before
‘PRGM’ disappears from the display.
•
‘PRGM’ disappears from the display and
the station is stored in memory.
54
•
You can select between 1 and
15 presets.
Press the TUNER
MEMORY button.
Press the TUNER
MEMORY button
again.
6
To preset another
station, repeat steps
2 to 5.
Press
to select preset
number.
RADIO OPERATION
Presetting Stations
61
21
Tune in to the
desired station.
Press the TUNER
button to select
the FM band.
Automatic Tuning 2
Manual Tuning
21
Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
Press the FUNC-
TION button to select
the FM band.
Press the STOP
( )
button to select "MANUAL"
and then press and hold
button to automatically search the band.
Automatic Tuning 2
Press STOP
( )
to select
MANUAL and then briefly
press to tune in to a lower or
higher frequency.
Manual Tuning
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
When is pressed, a
preset broadcast station is
selected.
Press and hold TUNING/CH to
automatically search for active
broadcasting stations.
Briefly press TUNING/CH to
increase or decrease the
frequency incrementally.
Automatic Tuning 1
Remote Control Unit
Main Unit
Listening to Radio
•
This unit does not receive
AM broadcasts.
Note
THQ22(41~70) GB 2006.5.13 10:33 AM Page 60