Filter
Top Products
20
•
Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash alternately.
•
You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
•
Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO and Numeric (0-9) buttons.
•
By default, the remote control is set to work with Samsung TVs.
See page 69 for more information on the operation of the remote control.
Press MODE button.
To Operate the TV and DVD Player with a Single Remote Control
23
Press the MODE button so
that the TV indicator on the
remote control flashes.
TV
DVD RECEIVER
TV
DVD RECEIVER
Press the POWER button to
turn on the TV.
56
Press the MODE button so that
the DVD RECEIVER indicator
on the remote control flashes.
Press DVD button to select
DVD/CD mode.
19
CONNECTIONS
Before Using Your DVD Player
Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc
you are using, these instructions may vary slightly. Read the instructions carefully before using.
1
Plug the power cord into the
AC power supply.
4
Press TV/VIDEO button to
select VIDEO mode.
Press and hold NTSC/PAL button on the remote controller for over
5 seconds while the power is turned off.
•
"NTSC" or "PAL" will appear in the display.
At this time, press the NTSC/PAL button shortly to select between
"NTSC" and "PAL".
•
Each country has a different video format standard.
•
For normal playback, the video format of the disc must be the same as
the video format of your TV.
Selecting the Video Format
1p~40p(410HD)-GB 7/27/04 4:58 PM Page 22