Filter
Top Products
10
power on and volume control
TURNING THE POWER ON/OFF
MUTE
BASS
FUNCTION
VOL
MUTE
BASS
FUNCTION
VOL
DC 12V 2AAUX IN
PUSH
DC 12V 2AAUX IN ONLY FOR SERVICE
PUSH
DOCK
ONLY FOR SERVICE
ONLY FOR SERVICE
DOCK
DOCK
DOCK
DOCK
or
1. To turn on this unit, press any button on the unit's top panel when the unit is in Standby mode.
or,
Press POWER on the remote control.
2. To turn off this unit, press the +# button on the unit's top panel for more than 3 seconds.
or,
Press POWER on the remote control again.
▪ The standby LED is on when AC Plug is connected to the wall outlet and the Power of the unit is off. The
standby LED is off when the power of the unit is on.
▪ The power of the unit automatically turns off if there is no input for 20 minutes.
ADJUSTING THE VOLUME
Use +, - buttons to adjust the volume. As you adjust the volume, the Input mode LED blinks.
The LED remains on in case you increase the volume when it has already been set to maximum, or decrease the
volume when it has already been set to minimum.
MUTE
BASS
FUNCTION
VOL
MUTE
BASS
FUNCTION
VOL
DC 12V 2AAUX IN
PUSH
DC 12V 2AAUX IN ONLY FOR SERVICE
PUSH
DOCK
ONLY FOR SERVICE
ONLY FOR SERVICE
DOCK
DOCK
DOCK
DOCK
or
Press the +/– button on the right side of the top panel.
or,
Press VOL +/– on the remote control.
▪ The volume level increases or decreases when you press VOL +/–.
▪ You can also use the volume controls of devices connected using the Dual Dock or Bluetooth to control
the volume. However, your ability to control the volume using the volume controls of devices connected
using Bluetooth may be limited.