Filter
Top Products
30 English
Setup
English 31
Ideal Centre
Speaker placement
Df: The distance from Front Speaker
Dc: The distance from Centre Speaker
Dr: The distance from Rear Speaker
It is desirable to place all speakers within this circle.
Ideal Rear
Speaker placement
Setting the Centre Speaker
If the distance of Dc is equal to or longer than the
distance of Df in the gure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
between
Df and Dc
0.00m 0.34m 0.68m 1.06m 1.40m 1.76m
Delay
Time
00 ms 01 ms 02 ms 03 ms 04 ms 05 ms
Setting the Rear Speaker
If the distance of Dc is equal to or longer than the
distance of Dr in the gure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
between
Dr and Dc
0.00m 1.06m 2.11m 3.16m 3.62m 5.29m
Delay
Time
00 ms 03 ms 06 ms 09 ms 12 ms 15 ms
NOTE
With PL II (Dolby Pro Logic II), the delay time
may be different for each mode.
With AC-3 and DTS, the delay time can be set
between 00 and 15mSEC.
The Centre channel is only adjustable on 5.1
channel discs.
✎
`
`
`
Test Tone
Settings
Move Select Return
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone : On ▶
Select Return
Use the Test Tone feature to check the speaker
connections.
Press the
_+
buttons to select ON.
The test tone will be sent to Front Left ➞ Center
➞ Front Right ➞ Rear Right ➞ Rear Left ➞
Subwoofer in order.
To stop the test tone, press the ENTER button.
ASC (Auto Sound Calibration) Setting
By setting the Auto Sound Calibration(ASC) function
just once when you relocate or install the product,
you can have the product automatically recognize
the distance between speakers, levels between
channels, and frequency characteristics to create a
5.1-channel sound eld optimized for your
environment.
AUX IN 1/
ASC IN
AUX IN 1/
ASC IN
ASC
Microphone
L: Front Speaker (L)
R: Front Speaker (R)
C: Centre Speaker
SW: Subwoofer
SL: Rear Speaker (L)
SR: Rear Speaker (R)
~
~