Filter
Top Products
13
ENG
● CONNECTIONS
CONNECTING THE WIRELESS SUBWOOFER (HT-WS1 ONLY)
The Subwoofer's linking ID is preset at the factory and the main unit and sub should link (connect wirelessly)
automatically when turned on. If the link indicator does not light when main unit and subwoofer are turned on, please
set the ID by following the process below.
Before moving or installing the product, be sure to turn off the power and disconnect the power
cord.
If the main unit is powered off, the wireless subwoofer will be in the standby mode and the
STANDBY LED on the upper side will blink.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or
any other device that uses the same frequency (2.4GHz) near the system, some sound
interruption may be heard due to interference.
The transmission distance of a radio wave is about 10m, but may vary depending on your
operating environment. If a steel-concrete wall or metallic wall is between the main unit and the
wireless receiver module, the system may not operate at all, because the radio wave cannot
penetrate metal.
If the main unit doesn't make wireless connection, follow steps 1-4 above to retry the
connection between the main unit and wireless subwoofer.
The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from
water and moisture.
For optimal listening performance, make sure that the area around the wireless subwoofer
location is clear of any obstructions.
▪
▪
▪
▪
▪
▪
▪
1. Plug the power cords of the main unit and subwoofer into the AC power supply.
2.
Press the ID SET button on the back of the subwoofer with a small, pointed object for 3 seconds.
The STANDBY indicator is turned off and the LINK indicator (blue LED) blinks quickly.
•
3. While main unit is powered off (
STANDBY
mode), press MUTE on the
remote control for 5 seconds.
The volume Level Indicator on the main unit lights up, then returns to
STANDBY mode.
4. Press the POWER button
to
turn on the main unit.
The main unit and the subwoofer are now linked (connected).
The Link indicator (blue LED) on the subwoofer is turned on.
You can enjoy better sound from the wireless subwoofer by selecting the
sound field mode. ( See page 16 )
•
•
•
•
POWER TV POWER
TV SOURCEVOL TV CH
PASS
NEWSMUSIC
MUTE
CINEMA
O/A
INPUT
POWER
LINK
AUTO
MENU
EXIT
TOOLS
INFO
POWER TV POWER
TV SOURCEVOL TV CH
PASS
NEWSMUSIC
MUTE
CINEMA
O/A
INPUT
POWER
LINK
AUTO
MENU
EXIT
TOOLS
INFO