Filter
Top Products
ENG
sound mode
SFE(SOUND FIELD EFFECT) MODE
You can set the SFE best suited for the type of music you are listening to.
Press the SFE MODE button.
SFE MODE appears on the display panel.
Each time the button is pressed, the selection changes as
follows
HALL1 ➞ HALL2 ➞ JAZZ ➞ CHURCH ➞ ROCK ➞ SFE OFF.
HALL : Provides a clear vocal as if listening in a concert hall.
JAZZ : Recommended setting for Jazz.
ROCK : Recommended setting for Rock.
CHURCH : Gives the feel of being in a grand church.
SFE OFF : Select this for normal listening.
SFE mode is not available with 7.1CH encoded signals or HD audio sound.
NEO:6 MODE
Enables you to play back 2 channel or DTS 5.1 channel audio signals over 7.1speakers.
Press NEO:6 MODE button.
NEO:6 MODE appears on the display panel.
Each time the button is pressed, the selection changes as follows.
CINEMA ➞ MUSIC ➞ NEO:6 OFF.
This mode decodes 2 channel signals to a high precision digital
matrix decoder.
CINEMA : CINEMA mode is optimized for movie playback.
MUSIC : MUSIC mode is optimized for music playback.
NEO:6 OFF : Select this for normal listening.
NEO:6 mode is not available with 7.1CH encoded discs or HD (High Defi nition) audio.
PCM signal is available when it is at 32KHZ, 44.1KHZ, 48KHZ, 88.2KHZ or 96KHZ.
This mode is available only with 2 channel or DTS 5.1 channel audio sources.
•
•
•
•
•
•
•
M
•
•
•
•
•
M
61
● SOUND MODE
HT-BD2_XAC_ENG_0123.indd 61 2008-02-20 �� 5:09:06