Samsung AH68-01018B Stereo System User Manual


 
17
GB
The timer enables you to switch the system on or off at
specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing On/Standby ( ) .
Press Timer/Clock until TIMER is displayed.
Press Program/Set.
Result:
ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
Set the timer switch-on time.
a Set the hour by pressing or button.
b Press Program/Set.
Result:
The minutes flash.
c Set the minutes by pressing or button.
d Press Program/Set.
Result:
OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a Set the hour by pressing or button.
b Press Program/Set.
Result:
The minutes flash.
c Set the minutes by pressing or button.
d Press Program/Set.
Result: VOL 10 is displayed, where 10 corresponds to the
volume already set.
Press or button to adjust the volume level and press
Program/Set.
Result:
The source to be selected is displayed.
Press or button to select the source to be played when the
system switches on.
If you select... You must also...
TAPE (cassette) Insert a cassette tape.
TUNER (radio) a Press Program/Set.
b
Select a preset station by pressing
Tuning
or .
CD (compact disc) Load a compact disc.
Press Program/Set to confirm the timer.
Press On/Standby ( ) to set the system to standby mode.
Result
: is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
If the timer switch on and off times are identical, the word ERROR
is displayed.
You can also use Multi Jog to instead
/ button in
step 4, 5, 6, 7
.
Timer Function
7
5
6
1
2
3
4
8
9
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To... Press Timer On/Off...
Cancel the timer Once.
Result: is no longer displayed.
Restart the timer Twice.
Result
: is displayed again.
Canceling the Timer
Timer
On/Off
EQ/S.Bass
REV.
Mode
CD SYNC.
CD
Repeat
Program/
Set
Mono/ST
Mute
Tuning
Mode
VOL.
Band
+10
Sleep
TAPE
Aux
Timer/
Clock
VOL.
Random
Counter
Reset
2
3,4,5,6,7,8
4,5,6,7
4,5,6,7
1,9
Timer
On/Off
EQ/S.Bass Sleep Aux
Timer/
Clock