Filter
Top Products
54
SETUP
•
You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
43 5
Press Cursor button
to move to ‘DELAY
TIME’ and then press
ENTER button.
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
Press Cursor ,
to set the Delay
time.
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
•
Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance between Df and Dc Delay Time
0 ms
1 ms
2 ms
3 ms
4 ms
5 ms
0 inch
13.6 inches
27.2 inches
40.8 inches
4.5 feet
5.6 feet
Distance between Df and Ds Delay Time
0 ms
3 ms
6 ms
9 ms
12 ms
15 ms
0 inch
40.8 inches
6.7 feet
10.0 feet
13.4 feet
16.7 feet
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
CENTER SPEAKER
It is desirable to place all speakers within this circle.
Reflector Front/Rear
Subwoofer Speaker (R)
Reflector Front/Rear
Subwoofer Speaker (L)
39P~78P(DS660T)-SECA GB 11/10/04 1:35 PM Page 55