Samsung 20041112090049937 Home Theater System User Manual


 
20
Each time the Mode button is pressed, the TV indicator (red) and the DVD RECEIVER indicator (green) will flash alternately.
You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO and Numeric (0-9) buttons.
By default, the remote control is set to work with Samsung TVs.
See page 61 for more information on the operation of the remote control.
Press MODE button.
To Operate the TV and DVD Player with a Single Remote Control
23
Press the MODE button so
that the TV indicator on the
remote control flashes.
TV
DVD RECEIVER
TV
DVD RECEIVER
Press the POWER button to
turn on the TV.
56
Press the MODE button so
that the DVD RECEIVER
indicator on the remote
control flashes.
Press DVD button to select
DVD/CD mode.
Before Using Your DVD Player
Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc
you are using, these instructions may vary slightly. Read the instructions carefully before using.
19
By default, the video format is set to "NTSC".
Each time the button is pressed, the video format switches between "NTSC"
and "PAL".
Each country has a different video format standard.
For normal playback, the video format of the disc must be the same as the
video format of your TV.
Turn off the main unit and then press NTSC/PAL.
Selecting the Video Format
1
Plug the power cord into the
AC power supply.
4
Press TV/VIDEO button to
select VIDEO mode.
CONNECTIONS