Samson SWC99BGT-K; SWC99BGT-I Headphones User Manual


 
13
Concert 99 Wireless System
The CR99 receiver can be installed into a standard 19” rack for transport or permanent
installation using the included rack ears. Follow the simple steps below to mount the
CR99:
Rack Mounting
Attach the included rack ears by screwing each
rack ear into either side of the CR99.
Position the CR99 receiver into an avail-
able rack space and slide in until the
rack ears are touching the rails of the
rack case and are aligned with the rack
rail holes.
Mount the receiver into the rack using
the appropriate size rack screws (not
included). To ensure equal tension and
balance when installing the receiver, you
should secure screws in a crisscross pat-
tern of opposite corners: top left -> bot-
tom right -> top right -> bottom left.
In order to mount two CR99 receivers in one rack
space, the system includes a center connection
piece. Screw the center connection piece into bot-
tom of each receiver and attach the short rack ears
to each receiver.
Mount the receivers into the rack using the
crisscross pattern described above.