Filter
Top Products
8
CONTROLS AND FUNCTIONS
3. SENSITIVITY
Controls the relative volume of the S40.
4. MONO INPUT
Accepts line level output specified for a powered subwoofer only. The SUB
MONO OUT from th Samson DMS80 would connect to the MONO INPUT.
5. STEREO INPUT FILTER (LEFT)
Accepts line level out from the left channel of a stereo source. The built-in
low pass filter cuts frequencies from 100 Hz up, therefore making it possible
to use the S40 with any stereo line source.
6.
STEREO INPUT FILTER (RIGHT)
Accepts line level out from the right channel of a stereo source. The built-in
low pass filter cuts frequencies from 100 Hz up, therefore making it possible
to use the S40 with any stereo line source.