Filter
Top Products
RS12M
PRODUCT SPECIFICATION SHEET
SERIES DESCRIPTION CATEGORY
RESOUND MONITOR SPEAKER PUBLIC ADDRESS
FEATURES (continued)
> Neutrik Speakon
®
plus 1/4-inch Extension output
connectors also allow you to “daisy-chain” multiple
Resound models together to create larger sound
reinforcement systems.
> Internal 18 dB/octave crossover with high frequency
lamp protection.
> The RS12M floor monitors offer two projection angles to
adjust the sound coverage for different size stages.
> Rugged, road-worthy carpet covered enclosures with steel
speaker grills for high reliability.
> Quality build and rugged construction ensure reliable
performance from night-to-night and venue-to-venue.
> Three-year extended warranty.
ARCHITECT’S & ENGINEER’S SPECIFICATIONS
The Samson RS12M shall be a small format wooden PA or
monitor cabinet. It shall have a 12 inch low frequency driver
and a one inch throat horn loaded with a 44mm compression
driver for the high frequencies. It shall have two tuned ports.
It shall have both 1/4 inputs and 1/4 inch extension outputs.
It shall have Speakon inputs and Speakon extension outputs.
The cabinet shall have two side handles. The cabinet shall
have two rear panel angles for long throw and short throw
situations.The Samson RS12M shall have a power handling
capacity of 175 Watts. It shall be an 8 Ohm configuration.
606mm
326.1mm
386.9mm
RS12M SPECIFICATIONS
Power Rating (@ 8Ω) ........................ 175 Watts RMS,
300 Watts Peak
Nominal Impedance ..........................8 Ohms
Frequency Response .........................50 Hz – 20 kHz ± 3 dB
Sensitivity .......................................94 dB SPL @ 1W/1m
MAX SPL .........................................116dB
LF Driver .........................................12-inch heavy-duty driver
HF Driver ......................................... 1-inch exit, 44mm Mylar
diaphragm compression driver
Protection ....................................... Internal overload Lamp on HF
driver
Mounting ........................................ 25º and 30º wedge monitor
position
Weight ............................................37 lbs. (16.8 kg)