Filter
Top Products
3
Thank you for purchasing the Samson F1200 / F800 Power Amplifier. The Samson F1200 / F800 is a
three-space stereo power amplifier which is optimized for live sound venues, commercial installations, DJ
set-ups and for driving small and medium-sized PA systems. Fan-cooled for maximum thermal protec-
tion, the F1200 delivers 600 watts of power per channel (or, in Bridged mode, 1200 watts), and the F800
provides 400 watts of power per channel (or, in Bridged mode, 800 watts), over the full frequency spec-
trum, from 20 Hz to 20 kHz. Combination connectors allow both 1/4" and RCA input connections; output
connections are provided on a combination banana plug and bare wire terminal connectors. The front
panel includes a Power switch and Power, dual channel Peak and Bridge LEDs.
In these pages, you’ll find a detailed description of the features of the F1200 / F800 power amplifier, as
well as a guided tour through its front and rear panels, step-by-step instructions for its setup and use,
and full specifications. You’ll also find a warranty card enclosed—please don’t forget to fill it out and mail
it in so that you can receive online technical support and so we can send you updated information about
these and other Samson products in the future.
With proper care adequate air circulation, your F1200 / F800 will operate trouble free for many years. We
recommend you record your serial number in the space provided below for future reference.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA) must be obtained before
shipping your unit to Samson. Without this number, the unit will not be accepted. Please call Samson at
1-800-3SAMSON (1-800-372-6766) for a Return Authorization number prior to shipping your unit. Please
retain the original packing materials and if possible return the unit in the original carton and packing
materials.
Introduction