Filter
Top Products
4
Guided Tour - Front Panel
1. INPUT - Connect your guitar to this standard 1/4” unbalanced jack. This G Series Input was
designed to handle the signals from guitar with a wide range of output levels from lipstick
single coils to the beefiest humbucker.
2. VOLUME -
This is the overall volume control for CHANNEL 1.
3. CH1 LED – When this light is illuminated, CHANNEL 1 is selected.
4. CHANNEL SWITCH - The switch allows you to select either CHANNEL 1 or CHANNEL 2.
5. CH2 LED
- When this light is illuminated, CHANNEL 2 is selected.
6 CRUNCH - CHANNEL 2’s pre-amp level control used to dial up tube overdrive tone for clas-
sic metal distortion, shredding leads and fat modern chunk.
7. VOLUME (CH2) - This is the overall volume control for CHANNEL 2.
8. BASS - This tone control allows you to adjust the low frequency tone of your amp. The
G Series tone controls use electronic circuits based around those of the best sound-
ing classic amplifiers. The normal BASS tone (that is, flat response) is when the knob
is at the 12 o’clock (“5”) position. As it is turned clockwise from the “5” position, the
frequency area is boosted; as it is turned counterclockwise from the “5” position, the
frequency area is attenuated.