Samson Escape Headphones User Manual


 
9
Expedition Escape
The Expedition Escape has an internal, rechargeable battery capable of 20
hours of continuous audio on a full charge. Even though the system may have
some charge when first taken out of the box, we recommend fully charging
your Expedition Escape before first using the system.
To charge the battery for the first time:
Set the power switch to the “OFF”
position.
Connect the Expedition Escape to an
AC power outlet using the included
power adapter.
Keep the system plugged in until
the Power Supply indicator turns
off, indicating the battery is fully
charged.
The Expedition Escape utilizes a sealed lead-acid gel cell battery. When not
in use, the battery will slowly self-discharge. If you are planning not to use
the Expedition Escape for a long period of time, it is advised to fully charge
the unit before storing. It is also important to charge the unit every six
months when not used. This will ensure a healthy battery and extend its life.
If the battery is left with a very low charge for an extended period of time, it
is possible to recharge the battery to working condition, but the charge time
can take over 24 hours.
If you find that the operation time of the Expedition Escape becomes
noticeably decreased, even after fully charging, the battery should be
replaced. Contact Samson customer service or your local distributor for a
replacement battery.
Charging the Battery
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO