Filter
Top Products
1. HIGH FREQUENCY LEVEL – Four-position
switch used to adjust the high frequency
response (in 3dB increments).
2. VOLUME
- Controls the amount of output level.
3. XLR INPUT (A6 AND A8 ONLY)
- Balanced,
+4dBu line level input is connected here via
standard XLR (microphone) cable.
4. POWER SWITCH
– Main power switch.
Resolv A Series Layout
Rear Panel Layout - A8a
5. VOLTAGE SWITCH – Used to select the
operating voltage.
NOTE: Be sure to check the voltage setting is
correct for your country. Also, be sure to use the
correct fuse type when changing the voltage.
6. AC INLET
- Connect the supplied IEC power
cable here.
7. RCA
– Used to connect signals from unbalanced,
–10dBV devices.
8. 1/4-INCH PHONE – Balance TRS (Tip, Ring,
Sleeve) 1/4-inch phone plug used to connect
balanced or unbalanced +4dBu line level signals.
6
8
5