Filter
Top Products
3
INTRODUCTION
The Russound R1250MC is a 12-channel power amplifier
and is ideal for use as the main amplifier in home theater
and distributed audio systems. The 12 channels are
arranged in pairs to provide amplification for six stereo
zones. The R1250MC provides an array of useful fea-
tures such as bridge mode operation, independent zone
triggering, bus inputs and multiple speaker outputs per
zone to meet a wide variety of applications and configu-
rations.
The R1250MC is rated at 50 watts per channel into 8
ohms and 80 watts per channel into 4 ohms. With the
Stereo/Bridge Mono switch in the Bridge mode position,
both channels in the zone are combined fora higher pow-
ered mono output. In bridged mode, the R1250MC pro-
vides 140 watts of power into a single 8-ohm load. All
this power is backed by three high output toroidal trans-
formers. Each amplifier output channel incorporates
robust protection circuitry for safety and reliability under
extreme circumstances.
FRONT PANEL
R
USSOUND
R1250MC P
OWER
A
MPLIFIER
RACK MOUNTING
The R1250MC amplifier can be rack mounted using the included rack-mount ears and hardware to attach the ears to
the amplifier. The amplifier will take 3 rack spaces with the feet removed.
+
+
R1250MC Side View
Rack Ear
Front View
Rack Ear
Side View
Rack Ear
Screw Hole
s
R1250MC AMPLIFIER
Zone Indicator LEDs: The six LEDs correspond to the six stereo zone amplifiers. The LED will illuminate red
when the amplifier power is on and the zone is in standby. The LED will illuminate green when the zone is active.
1
1