Filter
Top Products
While there are many different ways to connect your source equipment to your VHD Ultra Controller,
the examples shown above are the most common.
• COMPOSITE VIDEO INPUT:
Composite video is the most common type of signal used, but is also the lowest in picture quality. Many
sources have outputs that are limited to composite video, such as some VCR’s and camcorders; others
such as Laser Disc players actually produce slightly better results when using composite video.
• S-VIDEO INPUT
S-video is the second-best type of signal that can be used, but is MUCH better than composite video.
Using such sources as Satellite receivers, high-quality VCRs and DVD players (with no component
output) will produce a MUCH cleaner and sharper signal.
COMPONENT INPUT
Component video is the best type of signal that can be used. The most common sources that use com-
ponent outputs are DVD players, and it is highly recommended that component be used when possible.
Component video goes one step beyond S-video in picture quality; chroma (color) information is more
resolved and the overall picture appears more well-defined.
• PASS-THROUGH
This input is used to ‘pass-through’ any high-definition or computer signals that do not require process-
ing. The signal by-passes the VHD Ultra Controller’s processing and is sent directly to the display. The
pass-through may be used for COMPONENT outputs from a DTV decoder, a progressive-scan DVD play-
er or RGB outputs from a computer or other high-resolution sources.
QUICK SET-UP GUIDE
Connection Examples
12V TRIGGER
12V FUSE
RGB VIDEO OUTPUT VIDEO INPUTS
RS-232 IN
MADE IN USA
AC 120V 60Hz, 15W
RUNCO INTERNATIONAL
UNION CITY, CA
MASK
SCREEN
PASS THROUGH COMPOSITE
V
H
B G R Y Pr Pb S-VIDEO
VX-4c/VX-6c
Projector
Computer or
DTV decoder
DVD Player
Sattelite
receiver or
SVHS player
VCR, Laser
disc player,
camcorders
Reserved for
future use
Automation
System
6-9