2
RB-06 Stereo Power Amplifi er
Important Safety Instructions
WARNING: There are no user serviceable parts inside.
Refer all servicing to qualifi ed service personnel.
WARNING: To reduce the risk of fi re or electric shock, be
sure that the apparatus shall not be exposed to dripping
or splashing and that no objects fi lled with liquids, such
as vases, shall be placed on the apparatus.
Do not allow foreign objects to get into the enclosure. If
the unit is exposed to moisture, or a foreign object gets
into the enclosure, immediately disconnect the power
cord from the wall. Take the unit to a qualifi ed service
person for inspection and necessary repairs.
Read all the instructions before connecting or operating the component.
Keep this manual so you can refer to these safety instructions.
Heed all warnings and safety information in these instructions and
on the product itself. Follow all operating instructions.
Clean the enclosure only with a dry cloth or a vacuum cleaner.
You must allow 10 cm or 4 inches of unobstructed clear-
ance around the unit. Do not place the unit on a bed, sofa, rug, or
similar surface that could block the ventilation slots. If the component
is placed in a bookcase or cabinet, there must be ventilation of the
cabinet to allow proper cooling.
Keep the component away from radiators, heat registers, stoves, or
any other appliance that produces heat.
The unit must be connected to a power supply only of the type and
voltage specifi ed on the rear panel of the unit.
Connect the component to the power outlet only with the supplied
power supply cable or an exact equivalent. Do not modify the
supplied cable in any way. Do not attempt to defeat grounding and/or
polarization provisions. Do not use extension cords.
Do not route the power cord where it will be crushed, pinched, bent
at severe angles, exposed to heat, or damaged in any way. Pay
particular attention to the power cord at the plug and where it exits
the back of the unit.
The power cord should be unplugged from the wall outlet if the unit
is to be left unused for a long period of time.
Immediately stop using the component and have it inspected and/or
serviced by a qualifi ed service agency if:
• The power supply cord or plug has been damaged.
• Objects have fallen or liquid has been spilled into the unit.
• The unit has been exposed to rain.
• The unit shows signs of improper operation
• The unit has been dropped or damaged in any way
Please use Class 2 Wiring when connecting the speaker terminals
of the unit to ensure proper insulation and minimize the risk of
electrical shock.
Place the unit on a fi xed, level surface strong enough to support its
weight. Do not place it on a moveable cart that could tip over.
This symbol means that this unit is
double insulated. An earth connection
is not required.
Rotel products are designed to comply with international
directives on the Restriction of Hazardous Substances
(RoHS) in electrical and electronic equipment and the
disposal of Waste Electrical and Electronic Equipment
(WEEE). The crossed wheelie bin symbol indicates compli-
ance and that the products must be appropriately recycled
or processed in accordance with these directives.